SoftGlow Modern Table Lamp

This is a modern 3D printable table lamp designed for use with One Bambu Lab LED lamp MH001 or one or two Bambu Lab LED Puck RGB KC007 modules. The lamp has a clean, minimalistic look and is easy to customize with different filament colors and light-diffusing materials.

The model consists of a printed base, a diffuser, and interchangeable lampshades. The diffuser also works as the mounting part that holds the lampshade in place.

Different lightsource Versions Included

Bambu Lab LED Lamp MH001 Version
This version is designed for use with the Bambu Lab LED Lamp MH001. The LED lamp is mounted inside the lampshade, and the power cable is routed down through the center stem of the lamp and exits through the bottom of the base.

This gives the lamp a clean and simple appearance, with the cable hidden inside the printed structure.

Bambu Lab LED puck KC007 Version

Single LED Puck Version
This lampshade is designed for using one Bambu Lab LED Puck RGB KC007, pointing downward. The LED puck is mounted directly into small tabs at the top of the lampshade, creating a soft downward light that works well as a bedside lamp, desk lamp, or decorative table light.

Dual LED Puck Version
This version is designed for using two Bambu Lab LED Puck RGB KC007 modules. It allows light to shine both downward and upward. For the best effect, the upper part of the lampshade can be printed in white or translucent filament, allowing a soft glow to come out of the top.

For this version, an additional printed holder is included. This holder connects the two LED pucks together and allows them to be mounted into the diffuser.

Adjustable Lamp Height

The lamp is designed with an adjustable center stem. If you want to make the lamp lower, you can move the upper part of the stem downward in Bambu Studio using the Move tool before slicing.

Only move this part along the Z axis. Do not move it along the X or Y axis, as this may cause the stem, diffuser, and lampshade to become misaligned.

This allows you to customize the final height of the lamp without scaling the entire model. It is useful if you want a lower bedside lamp, a smaller desk lamp, or a more compact version for shelves and small spaces.

Recommended Filaments

I printed the lamp using Bambu Lab Matte PLA, which gives the lamp a clean and modern surface finish.
The model also works very well with translucent PLA, especially for the diffuser and the top-light section of the dual-puck lampshade.

Suggested combinations:

• Matte black lampshade with white or translucent diffuser
• Full translucent shade for a softer glowing effect
• Matte PLA base and stem for a premium look
• White or translucent top section for the dual LED puck version

Assembly

The lamp is designed to be simple to assemble:

1. Print the base, diffuser, and your chosen lampshade version.
2. Insert the Bambu Lab LED Puck RGB KC007 or the Bambu Lab LED lamp MH001 module.
3. For the single-puck version, mount the puck into the tabs at the top of the shade.
4. For the dual-puck version, print the extra puck holder, connect the two LED pucks, and mount the holder into the diffuser.
5. Attach the lampshade to the diffuser.

Notes

This model is designed specifically for Bambu Lab LED Puck RGB KC007 and Bambu Lab LED lamp MH001.
For best light diffusion, print the diffuser and optional glowing top part in white, natural, or translucent PLA.

The lamp is intended for LED use only. Do not use heat-generating bulbs or non-compatible light sources.