The HR Guy,

The guy who is always in the way making your life complicated by trying to take over everything, literally.

Items are seperated for easier printing. NO AMS Needed.

V2 Profile added with a different style hood, which fits better with the shirt collar. Sorry to those already printed, V1 looks awesome too, I just had some feedback I wanted to act on. The only difference is the top half of the shirt and the lanyard, so you could retro fit if desired.

📌 Recommended printing settings:

• Material: PLA
• Layer height: 0.16 mm
• Infill: 15%
• Nozzle: 0.4mm

supports where nessesary - I have tried to make it so all have a surface contacting the plate however due to the detail and complexity of the modeling they sometimes require alot of support, so be aware and be carefull during support removal. Use a naked flame gentley and for short intervals to clean surfaces after removal

Assembly – Recommended Method on multipart models

• Dry fit: Assemble all parts without glue to check alignment and fit.
• Cleanup: Lightly deburr edges and pegs where nessesary with a file/modeling tool to ensure uniform contact. All parts are tested and fit together.
• Optional fix: Use glue for permanent assembly.