Modular Stackable Storage for Card Sleeves

A stackable, modular storage system for packs of cards. Every plate shares the same footprint and uses a 4-corner peg-and-hole stacking system, so any combination locks together cleanly.

Three ways to use this:

Pre-made multi-row plates for the most common configurations. One print, less material, less print time per slot
Single-row plates in three heights (small, medium, large), so you can build custom stacks that match exactly what you store
Lite single-row plates (small, medium, large) which use a teardrop lattice on the top and floor, cathedral cuts in the side walls, and expanded back-wall windows to cut filament use by ~25% versus the standard single-row plates

To print multiple copies of the same plate in one job, use the "copies" feature in Bambu Studio (or in Bambu Handy when you send the file). The standard single-row plates fit 3-5 copies per build plate easily; the multi-row plates print one at a time.

Two print profiles are included

Default: faster print at standard quality, works well for all plates
Fine: slower print with cleaner transitions on the teardrop lattice and cathedral cuts in the lite plates. Trades print time for surface quality, so you can keep the filament savings of the lite plates without losing the smoother finish you'd get from a standard plate

Descrição