This is a desktop webcam mount that should fit any camera with a standard m6 threaded hole on the underside.

It has a few features that make it unique.

Firstly the clamp is designed to be printed at 45 degrees in an attempt to give it a little more strength and resistance to the layers pulling apart. I print with supports but quite honestly that is overkill - it will print okay without any at all.

Secondly the mount comes with several riser sizes depending on the height you want. Pick the size, or sizes you want and feel free to add them to the original plate. The choices are 50, 75, 100 and 150mm.

The mount is compact and strong, once screwed together (see photos) by hand it just presses together. 

I have used it several times and it works really well. If you want it to last I recommend going for a material that resists warping over time. PETG is probably the easiest. You can make it from PLA and it will be fine but the clamp will start to bend over time.