With the release of the Creator 5, I decided to redo the drawer I did ([https://makerworld.com/en/models/2328614-flashforge-ad5x-riser-with-drawer#profileId-2543964](https://makerworld.com/en/models/2328614-flashforge-ad5x-riser-with-drawer#profileId-2543964)) for the 5M/AD5X.  I know there is a side drawer version, but side drawers aren't really useful for the way I setup my printers. 

I designed this to give me as wide a drawer as possible, that worked with Gridfinity.   I probably could get one more column in (make it 42mm wider), but the machine moves a lot and I didn't want the stand to be two narrow, and allow movement from side to side.

So I designed a set of stands for the left side, the printer is symmetric so left and right sides are the same, and then added a larger drawer from side to side that goes all the way to the back of the printer.   Also made the stand 70mm high to allow deep Gridfinity bins or to double stack if wanted.

For the stands, I picked up some 0.4mm rubber feet from Amazon ([https://www.amazon.com/Self-Adhesive-Anti-Sliding-Anti-Scratch-Protectors-Appliances/dp/B0D78JL5DV/ref=sr_1_21_sspa?crid=C59LOUHZ4FV6&dib=eyJ2IjoiMSJ9.-s7Ym3GGMWo2vKQXRMJyE2S7Xm38RoJplcMfpV8SZvi1OtYVC4HxHSFXeZhWVH07ir_jBVlZlqNhVIqwTcGbP5coeeBmdjVdU-79FjG17JghO9AIKsPJjmHEGidRTeCM6YfcB9vxEeDgSd9ZMtpNs6gMlTdsx26i3w55cw6rQ1R6VJZ4HxfMV1OdbRTXJKYss6YYc3bJMYG9GP6fJ3pRwCcLFrK8REsHqVFFewSbplEDjP_NPLjtb7sxJAF5RHBCM_cR0rErJAycfCXKZJXlB6EN67MG5Ck_9SVJx_HDrwA.VJiUKqblApFn_Lf1wyd3zCxJ0BcUJ7VAi4in3qGA_PQ&dib_tag=se&keywords=non%2Bslip%2Bself%2Bstick&qid=1780918386&sprefix=non%2Bslip%2Bself%2Bstick%2Caps%2C194&sr=8-21-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9tdGY&th=1](https://www.amazon.com/Self-Adhesive-Anti-Sliding-Anti-Scratch-Protectors-Appliances/dp/B0D78JL5DV/ref=sr_1_21_sspa?crid=C59LOUHZ4FV6&dib=eyJ2IjoiMSJ9.-s7Ym3GGMWo2vKQXRMJyE2S7Xm38RoJplcMfpV8SZvi1OtYVC4HxHSFXeZhWVH07ir_jBVlZlqNhVIqwTcGbP5coeeBmdjVdU-79FjG17JghO9AIKsPJjmHEGidRTeCM6YfcB9vxEeDgSd9ZMtpNs6gMlTdsx26i3w55cw6rQ1R6VJZ4HxfMV1OdbRTXJKYss6YYc3bJMYG9GP6fJ3pRwCcLFrK8REsHqVFFewSbplEDjP_NPLjtb7sxJAF5RHBCM_cR0rErJAycfCXKZJXlB6EN67MG5Ck_9SVJx_HDrwA.VJiUKqblApFn_Lf1wyd3zCxJ0BcUJ7VAi4in3qGA_PQ&dib_tag=se&keywords=non%2Bslip%2Bself%2Bstick&qid=1780918386&sprefix=non%2Bslip%2Bself%2Bstick%2Caps%2C194&sr=8-21-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9tdGY&th=1)), to prevent it from sliding.

I added cutouts on the side allow your hands to get to the lift handles.

The main stand is a bit filament heavy, I used PETG, but I used 10% Gyroid, except where the printer feet are located, those have modifiers to use 15% Grid Infill, for added support.

I will be adding a profile with the Gridfinity Grid.

Assembly is petty simple, the two parts of the stand have dovetails that just slide into each other, you can use a rubber mallet to make sure its level.   The drawer uses dovetails and has guides on the side, after assembly glue the filler pieces into the sides and base.

If you wonder why I didn't use Orange for the base, it was because I have a lot of Black PETG.

If someone does print this, would you mind posting a picture, I would like to see what others setups look like.

You can checkout other items I have made for the Flashforge Creator 5 ([https://makerworld.com/en/collections/28409283-flashforge](https://makerworld.com/en/collections/28409283-flashforge)).  Or my other organization models ([https://makerworld.com/en/collections/16603099-multiboard-hsw-opengrid](https://makerworld.com/en/collections/16603099-multiboard-hsw-opengrid)).