🧲 SNAP – Magnetic Fidget Toy and Strong Fridge Magnet

Looking for a simple but satisfying magnetic fidget? SNAP combines a compact design with a surprisingly addictive magnetic click and snap action.

The model consists of two printed halves that attract, repel, slide, flip, and snap together in different ways, making it perfect for keeping your hands busy at your desk, during meetings, or while relaxing.

A strong fridge magnet too.

✨ Features

• Easy and quick assembly
• Compact pocket-size design
• Strong magnetic snap effect
• No glue required
• Beginner-friendly print
• Customizable front design (logo, text, colors)

🔧 Required Parts

For 1 complete SNAP Fidget you need:

• 12× Neodymium Magnets 6×2 mm
  • 6 magnets per side
  • 12 magnets total

Compatible magnets are available directly from Bambu Lab and many other suppliers.

🛠 Assembly

1. Print both halves. Each halves have two Parts.
2. Insert the 6×2 mm magnets into the designated slots. NO GLUE!
3. Make sure the magnet orientation is correct before inserting all magnets.
4. Assemble both halves. (Now you can glue it, if your tolarance are to big)
5. Enjoy the satisfying SNAP action!

🖨 Print Recommendations

• Layer Height: 0.20 mm
• Walls: 3 (Body) and 1 (Text)
• Infill: 15–20%
• Supports: Not required
• Material: PLA or PETG
• AMS Compatible: Yes 

⚠ Important

Before installing all magnets, test the polarity with the opposite half to ensure proper attraction and functionality.

If one side is installed incorrectly, the magnetic effect will not work as intended.

Have fun printing and snapping! 🧲✨

Hardware Required

• 12× Neodymium Magnets (6×2 mm)

Assembly Difficulty
⭐ Easy (under 5 minutes)

Designer: PolyForge3D