Dragon Ball Trunks Hueforge

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.4mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA+ Sunlu Sky Blue Transmission Distance: 4
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA+ Sunlu Grey Transmission Distance: 2
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Sky Blue
    At layer #12 (1.04mm) swap to Jade White
    At layer #15 (1.28mm) swap to Sky Blue
    At layer #17 (1.44mm) swap to Black
    At layer #19 (1.6mm) swap to Grey
    At layer #22 (1.84mm) swap to Jade White for the rest.

Descrição