Wall Mount for Razor Crest Brick Model – Two-Part Display Bracket

This is a two-part wall mount bracket designed for displaying a Razor Crest brick model on a wall.

The mount consists of two separate parts:

1. Model adapter part
   This part is attached to the underside of the brick model using the existing pin connection points, as shown in the pictures.
2. Wall bracket part
   This part is mounted to the wall with two screws. After that, the model adapter can simply be inserted into the wall bracket together with the model.

This makes it possible to display the model on the wall while still being able to remove it from the bracket when needed.

Important Print Information

Please print the parts in the orientation provided in the 3MF file.
The orientation is important for strength and stability and should not be changed.

Supports are required and are enabled in the print profile.

Installation Tip

For easier installation, I recommend removing some of the loose or delicate parts from the model first, such as covers, wings or turbines. Attach the mount to the underside of the model, place the model into the wall bracket, and then reinstall the removed parts afterwards.

Notes

• Use suitable screws and wall anchors for your wall type.
• Make sure the wall bracket is firmly attached before inserting the model.
• Check that the model sits securely before leaving it mounted.
• This is a fan-made accessory and is not an official product or affiliated with any brand owner.