🚿 Customisable Shower Room Hook

🎯 The Shower Hook That Fits Your Shower

Most over-door and shower glass hooks are designed for a fixed size. If your shower screen thickness, hook size, or layout is different, you're usually out of luck.

This fully parametric Shower Room Hook lets you create a hook that is customised specifically for your shower screen, glass panel, or shower door.

Simply measure your shower screen and enter the dimensions into the customiser to generate a hook that fits your exact requirements.

✨ Features

🔧 Fully Customisable Bracket

📏 Customisable Glass / Door Thickness

📐 Customisable Board Size

🪝 Customisable Hook Size

↔️ Single-Side or Dual-Side Hooks

🎨 Independent Hook Layouts

One of the most powerful features of this model is the ability to customise each side independently.

📦 Included Pre-Designed Profiles

If you don't want to customise every parameter yourself, I've already prepared a collection of ready-to-use profiles.

🚀 Standard Configurations

✅ Single-Side Version

✅ Dual-Side Version

This provides a total of 6 pre-designed profiles for quick and easy printing.

📏 Glass / Top Rail Thickness Variations

To make installation easier, I have included approximately 1 mm of clearance in each version.

Available sizes:

• 7 mm
• 9 mm
• 11 mm
• 13 mm
• 15 mm
• 21 mm
• 26 mm
• 31 mm

🏠 Typical Uses

• 🧺 Towels
• 🥼 Bathrobes
• 🪟 Shower squeegees
• 🧽 Loofahs
• 🧹 Cleaning brushes
• 🧼 Face washers
• 🛁 Bathroom accessories

🖨️ Print Recommendations

For best strength and durability:

• ✅ Use sufficient wall/perimeter count
• ✅ Use appropriate wall ordering
• ✅ Use suitable infill settings
• ✅ Select print speeds appropriate for the size of your design
• ✅ Configure supports where required
• ✅ Choose a material suitable for humid bathroom environments

PETG is generally recommended for bathroom use due to its moisture and temperature resistance.

⚠️ Important Warnings

🧠 This Is a Customisation Tool, Not a One-Click Solution

This model provides the ability to design a custom shower hook.

Users are still expected to have basic 3D printing knowledge.

🖨️ Tall Prints on i3 / Moving-Bed Printers

If you are using:

• Bambu Lab A1
• Bambu Lab A1 Mini
• Other bed-slinger printers

Please be careful when generating very tall models (approximately 200 mm+).

Tall prints may experience:

• ⚠️ Print wobble
• ⚠️ Layer shifting
• ⚠️ Loss of bed adhesion
• ⚠️ Complete print failure

Please refer to the images for examples of the available customisation options and design considerations.

📸 If you print one, I'd love to see your custom configuration. Please upload your makes, photos, and feedback!