A clean, minimal storage box with a lift-off lid — perfect for keeping SD cards, USB drives, and small accessories organized on your desk or in your bag.

Designed for easy printing with no supports needed.

📦 WHAT'S INCLUDED
- Box (bottom) — STL
- Lid (top) — STL

📐 DIMENSIONS
- Box: 110 x 75 x 45mm
- Lid: 114.8 x 79.8 x 12mm
- Wall thickness: 2mm
- Corner radius: 2.5mm
- Lid gap: 0.4mm each side (snug press fit)

🖨️ PRINT SETTINGS
- Layer height: 0.16mm
- Walls: 3
- Infill: 15% gyroid
- Supports: NONE
- Material: PLA or PETG
- Print time: ~1.5 hours (both parts)

✅ PRINT TIPS
- Print both parts flat on the bed
- If lid feels too tight, scale lid by 100.2%
- If lid feels too loose, scale lid by 99.8%
- PETG recommended for durability

🗂️ WHAT FITS INSIDE
- 6+ SD cards
- 3–4 USB drives
- Micro SD cards
- Small cables, adapters, SIM cards