Description: 
A simple replacement group for the Nerf Mirage that includes a T-pull to make it easier to use. You can still use the sights with this mod.
 

Materials: 
None required

Instructions:
It is very important to have these parts clean and relatively smooth before installing. In particular is the front notch on the T-Pull side. Filiment tends to sit in there and needs to be pulled out to allow proper installation. This part gets a bit of stress, so I have it set for 5 walls and shell layers with 20% infill for safety. My testing was with 2 walls and 10% infill. There was some wobble, but no failures. Use this knowledge as you wish.

1) Remove the 4 screws holding the existing grip on the Mirage.
2) Install the side of the handle that has the T-Pull.
3) Install the other side of the handle, aligning all pegs and ensuring the 2 sides fit flush.
4) Add 2 of the screws screws to the top to keep them together. These are the longer 2 screws
5) Add one of the existing screws to each side to hold it in place.