Flexi Triceratops – Print-in-Place | No Supports

Bring a classic dinosaur to life with this Flexi Triceratops! This fully articulated, print-in-place model is designed to come off the build plate ready to move—no assembly required.

Featuring a low-profile body with the head, belly, and tail flat to the ground, this design ensures stable printing and consistent results across a wide range of FDM printers. The segmented body allows for smooth, satisfying movement, while the iconic horns and frill give it that unmistakable triceratops look.

Perfect as a fidget toy, desk display, or quick and fun print.

Key Features

• 🦕 Print-in-place design (fully assembled after printing)
• 🔄 Fully articulated body and tail
• 🧵 No supports required
• 📏 Flat, stable design for reliable printing
• ⚡ Quick and beginner-friendly

Recommended Print Settings

Printer Type: FDM

Nozzle: 0.4 mm

• Layer Height: 0.16–0.2 mm
• Infill: 10–15% (Gyroid or Grid)
• Walls: 2–3
• Top/Bottom Layers: 3–4
• Speed: 40–60 mm/s
• Supports: OFF
• Adhesion: Brim optional (3–5 lines if needed)

Material Recommendations

• PLA (Best choice) → clean articulation and detail
• PLA+ → stronger joints
• PETG → works well with proper cooling
• ⚠️ TPU may fuse joints unless finely tuned

Print Tips

• Avoid over-squishing the first layer to prevent fused joints
• Let the print fully cool before moving parts
• Gently flex each segment to free movement
• If joints feel tight, reduce flow slightly or increase layer height

Scaling

• Designed for 100% scale
• Can scale down to ~80% depending on printer calibration
• Scaling up improves articulation and strength

Orientation

• Print flat on the build plate (default orientation)
• Model is optimized for clean bridging and joint clearance

Creator Note

Designed for reliable, repeatable prints and smooth articulation. If you print one, feel free to upload a make—I’d love to see your color variations and setups!