Dive Flag Keychain & Magnets

New magnets and keychains for us dive enthusiasts! Need magnets for your note board or keychains to mark certain doors (tank room, rescue equipment etc) or dive lockers for your guests? Look no further :) These simple magnets and keychains are super easy to print and utilize!

Magnet: Within each profile you will find a number of magnet models with each of them supporting a different size of neodymium magnet which are available on the Bambu Store.

Keychain: The hole and thickness of the model is 3,5 mm. The keychain split rings from the Bambu Store will work, as will any other 3rd party keychains available of similar size.

Magnets supported:

4x2, 6x2, 6x3, 8x2, 8x3, 10x2, 10x3

All Model sizes are 40 x 30 x 4,5 mm (excluding the eyes hooks for the keychains)

Compatible with all Bambu printers: X series, P series, H series and A series.

Instructions

• Select the plate with your choice of magnet
• After printing, press fit the magnet into place (I do not like to use glue)
• Depending on your printers tolerances, you may or may not have to use a dot of glue.

Tips

• The magnet holes are designed so that the magnet protrudes a very small amount and thus aiding in a better grip.

Print Settings (recommended)

• No supports needed
• Standard setting
• Gyroid infill