Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.83998mm                                                

  PLA PolyLite Black  Transmission Distance: 0.3
PLA BambuLab purple  Transmission Distance                                                                                                                                                                                        PLA elegoo beige  Transmission Distance: 4.8
 

  
Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to purple
    At layer #15 (1.28mm) swap to beige for the rest.