SnapSwitch Modular Coaster Holder

Upgrade your bar, patio, or kitchen with a premium, customizable coaster system that adapts to your night!

The SnapSwitch Coaster Holder features a unique, print-tested mechanical locking system. Print the main body just once and swap out the decorative front plates in seconds. No glue and no tools are needed! Perfect as a clean addition to your home or as a high-quality, functional gift for your next BBQ or housewarming party.

Key Features

• 100% Snap-Fit: No glue or hardware required. Just print, snap, and use.
• Interchangeable Front Plates: Swap the look in seconds depending on what you’re serving (Hops Design, Wine Grapes Design, or Solid Minimalist).
• Eco-Friendly & Filament Saving: Want a new style or color? Don't waste filament on a whole new holder. Just print a new set of front plates and snap them in.

• Ultra-Fast Assembly in less than 10 seconds:

Specifications & Compatibility

This design fits all round coasters up to 110 mm in diameter. The inner clearance between the front and back plates is 30 mm, giving you plenty of space to store a full set of coasters. While custom coasters are included in the file, the holder is fully compatible with any third-party round coasters you already own.

What's Included

• The Main Holder Body
• Decorative Front Plates (Hops, Wine Grapes and Clean Front)
• The Coasters (2 Options included):
  • 6 Coasters WITH Ironing for a smooth top-surface finish

  • 6 Coasters WITHOUT Ironing for a faster print or if you prefer the native texture of your chosen filament

     

Recommended Print Settings

• Use a Textured PEI Plate for the front plates to achieve the texture shown in the photos.
• Make sure your bed is clean! The front plates are printed face down. The parts with the wine grape design, in particular, consist of many individual parts during the first few layers which are only joined together as the printing process continues.
• Coaster Edge Texture Tip
  • For Better Grip (Default): Printing the coasters with the default profile settings (2 Wall Loops & 10% Gyroid infill) creates a stylish, slightly wavy texture along the outer rim. This is a neat side-effect that actually provides a much better grip when picking them up.
  • For Completely Smooth Edges: If you prefer an absolutely smooth, uniform outer edge, simply increase the Wall Loops to 4 or more in your slicer before printing.

Used Filaments:

• Main Holder Body → Bambu PLA Matte Ivory White
• Front Plates:
  • Hops Design → Bambu PLA Matte Dark Green
  • Wine Grape Design → Bambu PLA Matte Dark Blue
  • Clean Front Plates → Bambu PLA Matte Scarlet Red
• Coasters → Bambu PLA Matte Ivory White

If you like this functional design, please leave a review and upload your print! Cheers!