A family of scalloped, wave-walled jars with two interchangeable lid styles — pick your size, pick your closure. Prints support-free, no print-in-place fuss.

A collection of decorative jars with a soft 8-lobe scalloped profile and a rippled wave running down the walls. Designed as a matching set so you can mix sizes on a shelf or desk; catch-all for trinkets, q-tips, paperclips, hardware, or just a nice empty object that looks good.

Every jar comes with your choice of two lid styles, and they're cross-compatible within a size:

• Plug (flush) lid — drops in flush with the rim and lifts straight out. No friction, easy one-handed access. Best for things you reach for often, or a purely decorative cap.
• Overlap (stepped) lid — sits over the rim with a firm friction grip; it takes two hands to pop open. Best when you want the lid to actually stay put.

Recommended print settings

• Material: PLA or PETG (PETG if you want a bit more durability)
• Layer height: 0.2 mm (drop to 0.16 mm for crisper waves)
• Walls: 3 perimeters · Infill: 15% (the solid foot handles stability)
• Supports: None needed
• Orientation: As laid out on the plates — jars open-side up, lids as oriented

Lid fit / tolerance tip

The fit is tuned for a typical 0.4 mm nozzle at default Bambu tolerances. If your printer runs tight and the overlap lid won't seat, scale the lid only to 99.5%. If the plug lid feels too loose, scale the lid to 100.5%. Small steps — 0.5% is a real change at this size.