Table Leg Leveler

Tired of wobbly garden tables on uneven patios or decking? This simple and effective table leg stabilizer is designed to quickly eliminate wobble and improve stability in seconds.

Super easy to use:

• Place the Leveler onto one table leg 
• Position the table where you want it 
• Screw the adjuster up or down until the wobble disappears 

Because this design uses a threaded screw mechanism, it offers infinite adjustability from 4mm to 60.5mm (56.5mm total adjustment range), making it ideal for uneven outdoor surfaces.

Only one stabilizer is needed if your goal is simply to stop table wobble. However, multiple units can also be used to level or slightly raise the entire table if desired.

Compatibility:

Primarily designed for garden table legs with a diameter of 26mm or less.

If there’s enough interest, I’d be happy to create additional sizes — just let me know in the comments!

Printing Information:

Designed specifically for:

• Minimal supports 
• Strong first-layer adhesion 
• Easy and reliable printing 

Print Orientation:

• Print the base (outer screw) upright 
• Print the insert screw upside down 

The only supports typically required are for the small “dome” section of the inner screw. If your printer’s bridging is well tuned, you may not need supports at all.

This orientation keeps the threaded surfaces clean and functional straight off the printer for smooth adjustment and easy assembly.

The example in the photos was printed using Bambu Lab PLA Matte Dark Green (11501)

I am a hobbyist designer and creator with a passion for designing and I love to know how I can improve my designs so any comments or advice on how my Designs, Guides or Print Profiles could be improved are always welcome! Thank you for reading and have fun making!