The big man himself coming right at you! 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.16mm
The Max allowed Thickness is 3.2mm and the Actual Thickness is 2.4mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #9d2235 PLA #BambuLab Basic Maroon Red  Transmission Distance: 3
    #8f949b PLA #ELEGOO Basic Gray  Transmission Distance: 3.4 (bambu lab light gray might be a good sub here)
    #d3b7a7 PLA BambuLab Matte Latte Brown  Transmission Distance: 2
    #56b7e6 PLA #BambuLab Matte Sky Blue  Transmission Distance: 1
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Maroon Red
    At layer #12 (1.04mm) swap to Black
    At layer #14 (1.2mm) swap to Gray
    At layer #20 (1.68mm) swap to Latte Brown
    At layer #24 (2mm) swap to Sky Blue
    At layer #26 (2.16mm) swap to White for the rest.