Parametric Ripple Bedside Lamp - 100% Support-Free & Fully Customizable

Elevate your space with this stunning, modern Parametric Bedside Lamp. Designed with a harmony of organic geometry and functional engineering, this lamp features a beautifully sweeping Twisted Finned Base and a delicate Swept Flower Ripple Shade that diffuses light with a soft, captivating glow.

Whether you print it as-is or customize it to your exact liking, this lamp is engineered to print beautifully and assemble in seconds.

✨ Key Features

• 🎨 100% Support-Free Design: Both the base and the shade are designed from the ground up to print with zero supports. The cable escape channel at the bottom features a custom 45-degree self-supporting roof, leaving your print incredibly clean.
• ⚙️ Fully Parametric (OpenSCAD): Want it taller? More fins? A tighter twist? The raw OpenSCAD code is included! Easily customize every single parameter—from height and twist angle to wall thickness—using the OpenSCAD Customizer.
• 🔌 Integrated Wire & Socket Management: Features an internal feed channel and a socket well designed for standard E26/E27 light socket kits. The cord exits cleanly from a recessed side channel on the bottom.
• 🧩 Perfect Slide-Fit Mounting: The shade features an integrated internal spider hub that slides snugly over the locating pin of the base with built-in printing tolerances ($0.5\text{mm}$). No glue required!
• 🌈 Dual-Plate / Multi-Color Friendly: The parts are exported separately. We recommend printing the base in a dark warm tone (like Matte Espresso, Terracotta, or Wood PLA) and the shade in a light translucent or pastel shade (like Translucent White, Cream, or Marble PLA).

🛠️ Recommended Print Settings

This model has been highly optimized to save material and print quickly while maintaining absolute strength.

🏛️ The Base:

• Material: PLA (Matte, Silk, or Wood PLA look fantastic!)
• Infill: 15% - 20% (Gyroid or Grid)
• Wall Loops: 3 (For robust fins)
• Supports: NO

💡 The Shade:

• Material: Translucent PLA, PETG, or Matte White PLA (to diffuse light perfectly).
• Wall Loops: 1 or 2 (A single loop or thin walls make the light shine through gorgeously!).
• Infill: 0% (Print as a hollow shell)
• Supports: NO

🔌 Assembly & Wiring Instructions

1. Wire the Base: Feed your E26/E27 cord kit up through the bottom escape channel and out the top of the base.
2. Install the Socket: Push the threaded socket housing down into the top socket well (designed with standard E26/E27 clearance).
3. Add a Bulb: Screw in a low-heat LED bulb (highly recommended to prevent heat buildup).
4. Mount the Shade: Slide the shade over the top base pin. The internal spider alignment ring will lock it perfectly in place!

🚀 Customize it Yourself!

Open the provided .scad file in OpenSCAD to unlock infinite variations:

• Adjust the fin count and flare for a more organic or minimalistic look.
• Tweak the twist angles to match your exact home decor style.
• Scale it up to make a statement floor lamp!

If you love this design, please leave a ⭐⭐⭐⭐⭐ review and share your makes! Happy printing!