Designed the Rogues Vault Mini a full toolkit in an altoids tin for lock sport enthusiasts.

Included are 

3 plug followers as close to the standard sizes as I could get and still keep in the altoids profile. 14mm, 12.8mm, 10mm

1 Base with 3 variations. Without Magnets, with 6x2mm magnets, and with 6.3x2 magnets

1 Micro handle

1 Regular handle  with 2 variations  6x2mm magnets, and with 6.3x2 magnets

1 Tweezers Press them in the side that is flat up

1 Pinning Tray

1 Screw Driver handle I used glue and magnets for retention One side for screwing the other allows for the retention of a 2 inch bit driver I store them tip down in the long side otherwise gripping the tip for release could be difficult

The purchased Components 

[https://a.co/d/0de6Eeog](https://a.co/d/0de6Eeog) Any 2 inch driver should be fine 

[https://greyhoundpicking.com/products/the-force-edc-greyhound-edition](https://greyhoundpicking.com/products/the-force-edc-greyhound-edition) The Force-EDC (Greyhound Edition!)

[https://greyhoundpicking.com/products/z-bar-tension-wrench](https://greyhoundpicking.com/products/z-bar-tension-wrench)  Z-Bar Tension Wrench

Video of the Vault