Project: Pumpjack and rig.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #e7ceb5 PLA BambuLab Basic Beige  Transmission Distance: 8
    #781f1c PLA Paramount 3D Iron Red  Transmission Distance: 3
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Beige
    At layer #13 (1.12mm) swap to Iron Red
    At layer #18 (1.52mm) swap to White for the rest.