Starry Forest Bookmark Set

Van Gogh vibes met a mythical forest - a Starry Forest.

Pictures shown are printed in an 0.4mm Nozzle
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Cyan Transmission Distance: 3.5
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 3 unique filaments

Swap Instructions: Not applicable. This is a style for which colors are already assigned in the STLs. Since this print has at times multiple colors on a layer, an AMS is required.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print.

Stringing may occur with Hueforge, just use a lighter to whisk them away.

Descrição