Well, I printed @KitCrafters Origin-Zero Mecha (which is a posable action figure), and, well, I started printing more. I started printing more on a single plate, but it was hard to keep track of all the tiny pieces. Then, I searched MakerWorld for a KitCard for it. Guess what I found! Nothing. That was it! I imported The Origin-Zero Mecha into Onshape and got working. Now, this model has optimized space for bulk prints, and enough margin from each piece to prevent fusing. This model has no edits of the original geometry of the model, just a kit card built around it.

Assembly: See the awesome instructions by the original creator (original model 👉)

IMPORTANT: This model is for 0.4 mm nozzles. The runners are 0.6 mm wide, which means that the default settings of 0.6 nozzles will not print them. A 0.2 mm nozzle will make the runners difficult to remove. All test prints were printed with a 0.4 mm nozzle. 

Waste from the Kit Card: Virtually none. with only 0.37 more grams of filament, this model enhances bed adhesion (That doesn't mean you don't have to keep your bed clean (; ) and packages it up onto one card.

This is not for remixing. This is for people who just want to print the Origin-Zero Mecha.