This 1:6 scale cutlery place setting is perfect for creating realistic dining dioramas, dollhouse scenes, or miniature photography props (fashion doll size).It includes one fork, one knife, and one spoon, designed with AI assistance. Each utensil measures approximately 30 mm (1.2 inches) long. A US quarter is shown in the photos for scale reference.

Important Safety Note

Due to their small size and delicate details, these are not toys. They are not intended for rough handling or young children.

Recommended Print Settings

For the best results:

• Nozzle: 0.2 mm (strongly recommended)
• Supports: Enabled
• Quality: 0.10 mm layer height (Standard or High Quality profile)

I achieved reliable results with these settings. Prints using a 0.4 mm nozzle and/or without supports were inconsistent — the knife performed better, but the fork and spoon frequently failed. If you print without supports, reorient each utensil vertically.

Printing Multiple Sets

The STL contains one complete place setting. You can easily duplicate it in your slicer to print several at once. I have successfully printed up to six place settings in a single job.

Adhesion Tips

Small, delicate parts like these benefit from extra adhesion help. Apply a thin layer of glue stick or hairspray to the build plate.

Removing Prints & Supports

These pieces can break if handled roughly:

• Gently grasp the bottom of the handle (nearest the build plate) and slowly pull the utensil free. Supports will usually detach with it.
• Carefully wiggle away any remaining supports by hand, starting from the bottom.
• Avoid using cutters on the tines or spoon bowl — they can snap easily.

Thank You

I'm relatively new to 3D printing and created this model with AI assistance. I hope it helps with your dioramas! Feedback and suggestions are very welcome. I'm planning many more 1:6 scale designs — feel free to follow if you'd like to see future releases.