地面投影设计风格，1:400 1/400 scale stand 2.8mm 2.7mm 2.3mm DW NG 一体打印版 直接打印即可

1/400飞机模型支架有很多，但没有符合我的要求的设计，既然3D打印了，就增加一些设计感

之前我发布了飞机起落架风格的飞机模型支架，可调整模型角度，有1:200和1:400的

这次采用了地面投影设计风格，类似于双发飞机在地面的投影，一体打印版本，沿用飞机起落架风格

投影使用的是C919飞机的地面投影，1:400比例，双发飞机的地面投影都差不多，如图所示，其他双发飞机都可以用。

一体打印，无需支撑，提供了2.8mm，2.7mm，2.6mm，2.3mm，NG，DW 等多种接口，兼容 NG, JC, PH, PM, GJ 等多个模型品牌，还需要什么接口请给我留言。

There are plenty of 1/400 scale aircraft model stands available, yet none match my design requirements. Since I’m using 3D printing, I’ve added more stylistic details.

Previously, I released landing‑gear‑style aircraft model stands that allow angle adjustment, available in both 1:200 and 1:400 scales.

This new version features a ground‑shadow design inspired by the ground projection of twin‑engine aircraft. It is 3D‑printed as a single piece and retains the landing‑gear‑style aesthetic.

The shadow pattern is based on the ground projection of the C919 airliner in 1:400 scale. Ground shadows of other twin‑engine aircraft are similar, as shown in the picture, so this stand works for all twin‑engine models.

Manufactured as a one‑piece print with no support structures required, it comes with multiple connector sizes including 2.8 mm, 2.7 mm, 2.6 mm, 2.3 mm, NG and DW. It is compatible with major model brands such as NG, JC, PH, PM and GJ. Feel free to leave a comment if you need additional connector types.