Parametric Multi Stand

A fully parametric stand for laptops, tablets, books, or folders - fully customizable via OpenSCAD or the built-in MakerWorld Parametric Model Maker.

Printed and tested on a Bambu Lab A1 with Bambu Lab PLA Basic White.

Default configuration:

- Slot 1: MacBook Pro 16" M3 (17mm)

- Slot 2: MacBook Air M3 15" (13mm)

Parameters:

- slot_count - number of slots (1–4)

- slot_widths - individual width per slot in mm

- slot_width - default width for all slots

- depth - how far the device rests into the stand

- height - divider height above the base

- overhang_left / overhang_right - base overhang for stability

- base_thickness - thickness of the base plate

- wall_thickness - thickness of dividers and outer walls

- lightening_holes - toggle weight-reduction cutouts in the base

Print settings (Bambu Lab A1):

- Material: PLA

- Infill: 15-20%

- Supports: none required