Hi guys,

this is for Bambu Lab H2 Series machines with the laser/emergency stop button setup. It lets you relocate the emergency stop button instead of modifying or cutting the original part. As I was unable to place the button at the planned position I designed that key. It tells the sensor that the button is there. This is NOT a feature for getting rid of the button - it's quite the opposite → it shall enable you to place the button on a secure position! This should work for every H-Series printer. It was successfully tested on my H2C :)

ATTENTION:

THIS DOES NOT REMOVE OR BYPASS THE BUTTON! THE KEY ALLOWS REPOSITIONING THE BUTTON. MAKE SURE TO USE A PLACE WHERE YOU CAN REACH THE BUTTON EASILY!!! I'M NOT RESPONSIBLE FOR ANY DAMAGE MADE BY REPOSITIONING. USE THE KEY WITH CAUTION!

Just print it and insert the magnet from the BOM (round 10x2). I glued it just to make sure it won't remain in the housing of the printer when the key is removed. Before inserting make sure to use the right direction. Checking this is easy → just attract the magnet to the original one. Now use exact that direction.

EDIT: untested yet (printer is currently in action)→ it should also work the other way round (if not I will upload another reverse profile). also make sure to use the magnet in the opposite direction ;)

Happy printing!

BR,

B@sti