his stand is made for the 8BitDo SN30 Pro controller.  

My sincere thanks go out to [https://makerworld.com/en/@e1usion](https://makerworld.com/en/@e1usion) for providing feedback on the compatibility of this controller. 

The stand has deep indentations to allow for a good fit and stability. I added a groove in the middle of the base to save on filament. I also created a version of the base with a logo, so that it's always clear which controller goes into which dock. 

I removed the original logos so that my model would not infringe copyright law as well as the makerworld exclusive model license. 

Important: if you print the sleeves in PETG, you will most likely have to file down the notches on the controller base a little in order to make the sleeve fit. 

Available Sleeve designs (will be updated reguarly:)

• Original 

  

• Arc 

  

• StarWars 

  

• Quadro
  

• Angled Slats
  

  
  

Update: All logos are now  separate parts and can be colored easily using the color fill tool in bambu studio. 

The following single base models are also available:

• XBox One/S: [https://makerworld.com/en/models/2309169-xbox-controller-stand#profileId-2520822](https://makerworld.com/en/models/2309169-xbox-controller-stand#profileId-2520822)
• XBox 360: [https://makerworld.com/en/models/2425082-xbox-360-controller-stand#profileId-2659776](https://makerworld.com/en/models/2425082-xbox-360-controller-stand#profileId-2659776)
• Original Xbox: [https://makerworld.com/en/models/2828997-original-xbox-controller-stand#profileId-3151808](https://makerworld.com/en/models/2828997-original-xbox-controller-stand#profileId-3151808)
• PS3: [https://makerworld.com/en/models/2504451-controller-stand-for-ps3#profileId-2753546](https://makerworld.com/en/models/2504451-controller-stand-for-ps3#profileId-2753546)
• PS4: [https://makerworld.com/en/models/2429222-controller-stand-for-ps4#profileId-2664671](https://makerworld.com/en/models/2429222-controller-stand-for-ps4#profileId-2664671)
• PS5: [https://makerworld.com/en/models/2309147-ps5-controller-stand#profileId-2520796](https://makerworld.com/en/models/2309147-ps5-controller-stand#profileId-2520796)
• Switch Pro 1: [https://makerworld.com/en/models/2429600-switch-pro-1-controller-stand#profileId-2665097](https://makerworld.com/en/models/2429600-switch-pro-1-controller-stand#profileId-2665097)
• Switch Pro 2: [https://makerworld.com/en/models/2442152-switch-pro-2-controller-stand#profileId-2680071](https://makerworld.com/en/models/2442152-switch-pro-2-controller-stand#profileId-2680071)
• Meta Quest 3: [https://makerworld.com/de/models/2396844-meta-quest-3-controller-stand#profileId-2626633](https://makerworld.com/de/models/2396844-meta-quest-3-controller-stand#profileId-2626633)
• 8Bitdo 64: [https://makerworld.com/en/models/2514299-8bitdo-64-controller-stand#profileId-2765424](https://makerworld.com/en/models/2514299-8bitdo-64-controller-stand#profileId-2765424)
• Nintendo Joy-Con Grip available on Makerworld ([https://makerworld.com/en/models/1864709-joycon-controller-grip?from=search#profileId-1994974](https://makerworld.com/en/models/1864709-joycon-controller-grip?from=search#profileId-1994974)) : [https://makerworld.com/en/models/2542092-joycon-controller-grip-stand#profileId-2798856](https://makerworld.com/en/models/2542092-joycon-controller-grip-stand#profileId-2798856)
• Gamesir Cyclone 2: [https://makerworld.com/en/models/2728429-gamesir-cyclone-2-controller-stand#profileId-3023577](https://makerworld.com/en/models/2728429-gamesir-cyclone-2-controller-stand#profileId-3023577)
• Nintendo JoyCon Grip: [https://makerworld.com/en/models/2728400-nintendo-joycon-controller-stand#profileId-3023544](https://makerworld.com/en/models/2728400-nintendo-joycon-controller-stand#profileId-3023544)
• Steam (2015): (NOT COMPATIBLE with the standard base and sleeve, uses a slightly bigger base and sleeve due to the large size of the V1 controller) - [https://makerworld.com/en/models/2769452-steam-controller-stand#profileId-3076025](https://makerworld.com/en/models/2769452-steam-controller-stand#profileId-3076025). Can not be mixed with my other bases
• Steam (2026): [https://makerworld.com/en/models/2788119-steam-2026-controller-stand#profileId-3099811](https://makerworld.com/en/models/2788119-steam-2026-controller-stand#profileId-3099811)
• Thrustmaster ESwap Pro: [https://makerworld.com/en/models/2807591-thrustmaster-controller-stand#profileId-3124408](https://makerworld.com/en/models/2807591-thrustmaster-controller-stand#profileId-3124408)
• 8BitDo Pro 2: [https://makerworld.com/en/models/2862935-8bitdo-pro-2-controller-stand#profileId-319520](https://makerworld.com/en/models/2862935-8bitdo-pro-2-controller-stand#profileId-319520)
• Nintendo PowerA: [https://makerworld.com/en/models/2866966-nintendo-power-a-controller-stand#profileId-3200278](https://makerworld.com/en/models/2866966-nintendo-power-a-controller-stand#profileId-3200278)

I also designed a dual, triple and quad stand if you have multiple controllers. This can be found here: [https://makerworld.com/en/models/2309245-dual-controller-stand-for-xbox-and-ps5#profileId-2520916](https://makerworld.com/en/models/2309245-dual-controller-stand-for-xbox-and-ps5#profileId-2520916)