Project: peony.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #ff5500 PLA BambuLab Basic Orange  Transmission Distance: 3
    #ffaa00 PLA PolyLite Gold  Transmission Distance: 1
    #ffffff PLA PolyLite White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Orange
    At layer #13 (1.12mm) swap to Gold
    At layer #20 (1.68mm) swap to White for the rest.