Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160.06x200mm in size

You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.03899mm

    #000000 PLA Sunlu schwarz  Transmission Distance: 0.1
    #91202b PLA eSUN Fire Engine Red  Transmission Distance: 3.3
    #ffe5b4 PLA Creality Peach Fuzzy  Transmission Distance: 4.8
    #ffffff PLA BambuLab Jade white  Transmission Distance: 5.8
This print uses 4 unique filaments

Swap Instructions:
    Start with schwarz
    At layer #4 (0.4mm) swap to Fire Engine Red
    At layer #5 (0.48mm) swap to Peach Fuzzy
    At layer #9 (0.8mm) swap to Jade white for the rest.