Project: Great Cornholio.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160x212.62mm in size

You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 2mm and the Actual Thickness is 1.84mm

    PLA+ Sunlu Black  Transmission Distance:
    PLA+ Sunlu Grey  Transmission Distance:
    PLA BambuLab Basic Jade White  Transmission Distance:
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Grey
    At layer #15 (1.28mm) swap to Jade White for the rest.