Hueforge Bartman Bart Simpsons

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.04mm

    #000000 PLA BambuLab Basic Black Transmission Distance: 0.6
    #482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1
    #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #18 (0.84mm) swap to Indigo Purple
    At layer #22 (1mm) swap to Sunflower Yellow
    At layer #32 (1.4mm) swap to Jade White for the rest.

Descrição