Magnetic Powered Button Fidget 

What is this? 

It's a fidget button powered by 2 opposing magnets.

Feel the pleasure of pushing together 2 opposing forces!

I added preconfigured profiles for 

• 10mmx2mm Magnets 
• 08mmx2mm Magnets

And to scad customizations

• Magnet Button Parametric - Simplified v1.0.scad

  Here you can easily change the size to fit your own magnets.

• Magnet Button Parametric - Fully Parametric v1.0.scad

  Here you can change anything in the project.

Printing tips:

In case you use files exported from the customizer, you must turn on support in the slicer, and deactivate “remove small overhangs”. 

You need to support to print the pins correctly.

Assembly: 

1 - Fit the magnets in the caveties of each part. Make sure they are opposing to each other. 

2 - Slide the top part inside the bottom piece, aligning the pins into the sliding slots.

3 - While pushing down the button, turn the top piece counterclockwise.