Floating Display Frame – Snap Fit Suspended Showcase

Showcase your favorite collectibles with a clean floating effect using this fully 3D-printable snap-fit display frame.

Designed as a 5-part system, this model uses transparent elastic film (TPU/PVC or similar durable stretch foil recommended) to suspend small objects securely between two tensioned frame halves. No glue or screws required.

Perfect for:

• Diecast cars / Hot Wheels
• Jewelry
• Trading cards
• Mini collectibles
• Small display pieces

Features:

• 5 printed parts total
• Snap-fit inner and outer frame system
• Stretch-film suspension design
• Filament hinge pin system (uses leftover filament)
• No glue required
• No screws required
• Reusable and easy to reopen
• Display stand included

Assembly:

1. Place durable transparent stretch film over the outer frame.
2. Press the inner frame firmly into all 4 corners until it clicks securely.
3. Repeat for the second frame half.
4. Align both hinge sides carefully.
5. Insert a piece of filament through the hinge channel.
6. Trim filament carefully.

Important:

Standard kitchen plastic wrap may tear.
For best results use:

• TPU clear film
• PVC stretch film
• Durable transparent elastic foil

Printing Recommendations:

• PLA or PETG
• 0.2 mm layer height
• 3–4 walls
• 20–30% infill

Notes:

Press corners evenly for proper film tension.
Be careful when inserting filament hinge to avoid snapping.

Print. Snap. Float.

If you enjoy this model, feel free to share your makes and adaptations on MakerWorld.