[https://www.patreon.com/cw/3D_MENTIEL](https://www.patreon.com/cw/3D_MENTIEL)

Si vous aimez mon travail, souhaitez vendre mes créations ou trouver des modèles exclusifs venez faire un tour sur mon Patreon

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50x149.88mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.2
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #ff81ee PLA Elegoo Pink  Transmission Distance: 4.7
    #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.4
    #ffffff PLA Deeplee White  Transmission Distance: 4.7
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Red
    At layer #14 (1.2mm) swap to Pink
    At layer #16 (1.36mm) swap to Sunflower Yellow
    At layer #20 (1.68mm) swap to White for the rest.