The pressure drop hit the shoreline before the wave did. Emerging from the churning depths, the massive Kanto heavy-hitter broke the surface, letting out a deafening roar that shattered the sea spray. Water spiraled and crashed violently around its heavy armor, pulling the raw kinetic power of the ocean up with it as it prepared to strike.

This piece captures the sheer intimidation of a fully evolved icon in the heat of battle. The heavy, comic-book-style inking and stark white splash effects emphasize the chaotic energy of the water, while the deep blue filament brings a striking, icy pop of color to the intense shadows of the 3D depth.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 1.6mm
The Max allowed Thickness is 4mm and the Actual Thickness is 3.92mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #505558 PLA Inland Gray  Transmission Distance: 0.4
    #b15533 PLA Bambu Matte Terracotta  Transmission Distance: 1
    #0056b8 PLA Bambu Basic Cobalt Blue  Transmission Distance: 0.7
    #e8dbb7 PLA Bambu Matte Desert Tan  Transmission Distance: 0.7
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #22 (1.84mm) swap to Gray
    At layer #24 (2mm) swap to Terracotta
    At layer #26 (2.16mm) swap to Cobalt Blue
    At layer #28 (2.32mm) swap to Desert Tan
    At layer #37 (3.04mm) swap to Jade White for the rest.