Turn your garden hose into a fun chaotic water toy for hot summer days!
Crazy Water Flower sprays water in every direction while moving wildly, creating a playful fountain effect kids will love.

Features

• Fun chaotic water sprays
• Printable Gardena-compatible hose connector
• Easy to print and assemble
• Perfect outdoor summer toy for kids

Just connect it to your garden hose and let the water party begin!

Print Instructions

• The Gardena Hose Adapter features really thin tubes for the silcone tube to slide onto. Make sure you have perfect clean bed, for good adhesion. High Temp PEI with Bambu Liquid Glue works best
• If you want to use the printed seal, print it in TPU with at least 95A. 90A would be better. The original O-Ring works best if you have one laying around.

Assembly Instructions

Remove the integrated supports of the Gardena Connector

Add the seal. You can either add a the printed TPU seal or the original Gardena - Adapter O-Ring.

Cut 4 times 3x5mm (Maker Supply; RC021) silicone tubes. Tube Length should be ~400mm (~16inch).

Add the silicone tubes to the gardena hose adapter

Push the silicone tupes through the main base

Push in the gardena connector to the base. It should be a snap fit.

Add the flower sprinklers to the other side of the silicone tubes

Add the middle part to the flower head, make sure you align the snap pins correctly.

Now you can screw the flower head to the base.

Playing

• Connect the gardena hose to the Crazy Water Flower
• secure it with the printed stakes to the ground
• turn on the water, let the pressure build up
• …and have FUN with your