Bamboo Forest Hueforge

I made this in two variants by swapping layers #7 and #13 green shades for different effects.

Both are included in the single file.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.21024mm

    #000000 PLA BambuLab Basic Black Transmission Distance: 0.6
    #00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2
    #50533c PLA+2.0 Sunlu Olive Green Transmission Distance: 0.1
    #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to BambuLab Green
    At layer #13 (1.12mm) swap to Olive Green
    At layer #19 (1.6mm) swap to Beige for the rest.

Descrição