Hey Everyone!

As my wood working journey continues and I'm acquiring more tools, I realize there is a definite need for organized storage. I found myself not having space for each container my bits came in so I designed these holders. You can use either .500 shank bits or .250.  I used a smooth PEI plate and the gray inserts are TPU for AMS, They printed just fine on my A1 through the AMS Lite with a 0.4 mm nozzle. I have a dedicated hot end I use for TPU and do a cold pull after every print so its ready for the next print, be sure to follow the instructions.  I don't recommend trying to use regular filament for the inserts as the tolerances are designed to flex, holding the bits in place. Once i decided which bits were going where I used CA glue to hold them in permanent  The main profile labeled "Complete Set" has everything together on separate plates, there are also separate profiles for each of them as well.  

Profile for my A1 Mini friends:

I think some of the individual profiles are compatible with the mini.  There is also an A1 Mini  print profile available  (You will need to print plate 5 twice) 

Print Specifications:

PLA and TPU 

0.4 mm nozzle

0.2 layer height 

2 wall loops 

5% infill

15% infill (large inserts)