This is a functional remix of the Rapsodo MLM2PRO Leveling Stand designed to make setup faster, more accurate, and compatible with a wider variety of hitting surfaces.

Key Improvements:

1. Integrated Bubble Level Sight: I have added a cutout underneath the laser holder along with a top-down sight hole. This allows you to place a circular bubble level (spirit level) directly in the center of the stand. You can now ensure your unit is perfectly level without having to balance a level on top of the device.
2. Extended Leveling Bolts: The original bolts were a bit short for premium, thick-pile hitting mats. I have increased the height of the threaded bolts to provide more travel, ensuring you can get a level reading even on uneven or deep turf.
3. Laser Ready: Retains the center channel for a laser pointer to help with alignment to your target or screen.

Hardware Needed:

• (3) 3D Printed Bolts (Included in profile)
• (1) Small circular bubble level 
• (Optional) Laser pointer for alignment.

Printing Tips:

• Material: PETG or ASA is recommended if you practice in a hot garage or outside, as PLA may warp in the sun.
• Infill: 60% - Could reduce this significantly, but I choose to go higher for added strength.  
• Walls: 3-4 walls to ensure the threaded sections are durable.
• .3mf has no supports required for the bolt holes and the threads of the bolts themselves.  Supports are not required in those areas as long as your printer is dialed in.