Simple water level indicator for IBC water tank. I have the tank full covered by wooden cladding, so it was not easily readable how many water is inside. Now it is.

• Fast print, low filament needs - Recommend to print in PETG (I used basic Elegoo/PM/Landu filaments). Red bulb (water level indicator) looks very well in the hose.
• For 10mm/15mm (inner/outside) transparent water hose paired with one hose clamp (12-16mm). Approximately 1,2m of hose is needed.
• One hole for standard 6x30(40,50,60,etc.) screws is enough to fix indicators to the board.
•  You can mount on left or right side of the tank, both versions are part of the model.
•  Even if you don’t have your IBC covered with anything, just use any 1m+ long wood scrap plank and mount the plank on IBC vertically.

Texts are not part of model, fully created in Bambu Studio, feel free to use your own labels, fonts and colors.