Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160x225mm in size

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.96mm and the Actual Thickness is 1.92mm

    #000000 PLA+ Sunlu Black  Transmission Distance: 0.6
    #565d65 PLA+ Sunlu Grey  Transmission Distance: 2
    #89939c PLA+ Sunlu Silver  Transmission Distance: 2
    #d22332 PLA+ Sunlu Red  Transmission Distance: 6
    #ffffff PLA+ Sunlu White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Grey
    At layer #14 (1.2mm) swap to Silver
    At layer #16 (1.36mm) swap to Red
    At layer #21 (1.76mm) swap to White for the rest.