你好朋友，
很高兴分享这款模块化桌面收纳——来自我【为了织造的制造】系列设计的第一期
由模块化外框、内抽屉和分隔板组成
可以横竖向自由组合，拼装适合你的桌面的排列形式

收纳盒宽度统一为100mm，其中——
70110规格：外框高70mm长110mm，单层内抽屉，是此系列的1×1最小单元，适配950款分隔板
70220规格：外框高70mm长220mm，双层内抽屉，是此系列的1×2单元，适配934款和2050款分隔板

可能要注意的点：
如果你在拼装过程中发现咬合过于松弛，可以通过在接触面贴上合适厚度的纸胶带来优化！

再次感谢——来自各位朋友们的认可和等待
以及抱歉——迟来的模型分享！
如果模型和打印设置有任何建议或需要完善的信息，请积极与我联系或评论区提出
期待看到大家的打印成品和diy收纳方案

Hello friends,

I’m happy to share this modular desk storage — the first release from my “为了织造的制造” series.

It consists of a modular outer frame, inner drawers, and spacer panels.
You can freely combine them horizontally and vertically to create a layout that suits your desk.

All storage boxes have a uniform width of 100mm. Among them:

* 70110 size: outer frame height 70mm, length 110mm, single-layer inner drawer. This is the smallest 1×1 unit in the series, compatible with the 950 spacer.
* 70220 size: outer frame height 70mm, length 220mm, double-layer inner drawers. This is the 1×2 unit in the series, compatible with the 934 and 2050 spacer.

Things to note:
If you find the joints too loose during assembly, you can improve the fit by applying tape of an appropriate thickness to the contact surfaces.

Once again, thank you all for your support and patience.
And apologies for the delayed release of this model!

If you have any suggestions regarding the model or printing settings, please feel free to contact me or leave a comment.
Looking forward to seeing your prints and DIY storage ideas!