Stop wasting time looking for the "perfect" drawer organizer. This fully parametric model allows you to create custom storage bins for anything—from office supplies and tools to kitchen utensils and hobby gear.

The unique feature of this model is the Hybrid Divider System:

1. Automatic Mode: Simply enter the number of columns and rows, and the script calculates a perfect grid for you.
2. Manual Slider Mode: Need one large compartment and three small ones? Switch to manual mode and use the sliders to place each wall exactly where you want it.

Features

• Fully Parametric: Adjust width, depth, height and wall thickness.
• Custom Handle: Optional "scoop" handle for easy removal from tight drawers.

• Rounded Corners: Sleek design that is easy to clean and looks professional.

   

User Guide: How to Customize

1. Basic Setup

• Width, Depth & Height: Measure your drawer or the items you want to store. Input the total outer dimensions.
• Wall Thickness: I recommend 2 or 3mm for a sturdy bin

2. Choosing your Layout

• The "Lazy" Way (Automatic): Set Divider_Mode to Automatic. Change Auto_Columns and Auto_Rows to create a symmetrical grid.
• The "Pro" Way (Manual): Set Divider_Mode to Manual Sliders.
  • Set Manual_X_Count to the number of vertical walls you want.

  • Use the X_Pos sliders to slide the walls to the left or right.

     

3. Finishing Touches

• Handle: Enable Show_Handle if the bin fits tightly in a drawer. You can adjust the Handle_Width to your liking.
• Corner Radius: A value of 3 to 5 gives a nice modern look. Set to 0 for sharp 90-degree corners.

4. Printing Recommendations

• Material: PLA is perfect. Use PETG if the bin will be in a hot environment (like a car or garage).
• Walls: Use at least 3 wall loops to ensure the dividers are solid.
• Infill: 10-15% is plenty, as the walls are mostly solid anyway.
• Support: No supports needed!