What it is:

It's a fairly simple but perfect for me modular wrench and pliers organizer for my toolbox. It features dovetail connections, 4 sizes (can make larger if you like), and slots for magnets to keep them from moving around in your toolbox. 

Why I made it:

I have seen a lot of similar ideas in the past but none seemed to have all the things I was looking for. I made the letter sizing guide so you only need to print what sizes you specifically need. 

Why it’s useful:

- Organize that cluttered toolbox!

- Modular so you can easily move and shift as your toolbox needs change.

- The magnet slots on the bottom provide a great way to secure the holders from moving a lot when shutting or opening your drawers. 

Print notes:

- Material: Any PLA should work great. Anything stronger will do fine too but not necessary.

- Layer height: .20mm but go even smaller if you want for a higher level of detail!

- Supports: None needed!

- Infill: 6% gyroid, bump up if necessary but mine are doing great with the two walls.

- Estimated print time: Varies depending on how many you print. About 30 minutes per single but more models on the same plate speeds it up!

- Colors needed: Go wild and pick any color you have. Let me know if you really liked some fun color when you did it. 

Assembly / use:

I would recommend super gluing the magnets in if you choose to use them and the slots are big enough for many common sizes! You lso might need to tap the dovetails in the final millimeter but they are super rock solid and all of mine ended up fitting perfectly!