Is your Bambu Lab A1 shaking during high-speed prints, especially with an AMS Lite Top Mount? This simple yet effective base clamp is designed to securely lock your printer to the workbench or baseboard. By eliminating the physical "sway" of the machine, you significantly reduce ghosting, ringing, and inconsistent layer lines.
 

I personally experienced significant print quality issues (ghosting) due to the top-heavy nature of the AMS mount. After installing these clamps, the vibrations vanished, and the print quality became buttery smooth.

Key Features

• Stability Boost: Dramatically reduces machine wobble during rapid X/Y movements.
• Top Mount Essential: A must-have if you use the AMS Lite mounted on top of the printer.
• Quick Install: Secures with just 2 screws per clamp.
• Easy Access: Since these clamp the front corners, you can still easily remove the printer by sliding it slightly forward and lifting it up—no need to unscrew everything to move your machine.
• Resource Efficient: Low filament usage and very fast print time.

Recommended Print Settings

• Material: PLA, PETG, or ABS/ASA (Anything stiff works great).
• Infill: 10% is plenty if it breaks increase infill to 20% (Gyroid for extra strength).
• Walls: 3 walls to ensure the screw holes are solid.
• Supports:  default

Hardware Needed

• 2x Wood screws (or bolts, depending on your base surface) per clamp.