Stackable hydroponic tower (v1)

This is a modular tall planter designed mainly for climbing or taller plants. The design allows easy stacking of multiple units to create a stable vertical system.

• Stackable design – extend vertically as needed
• Reinforced structure – rear side includes a hole for a 5–6 mm rod, which significantly increases stability
• Removable front grid – ideal for plant support or easy handling
• Modular system:
  • bottom part = base (stand)
  • upper part = planter body with grid, which screws onto the base
• Expandable – the body can be upgraded with a watering funnel

1. Print the base (stand)
2. Screw on the planter body
3. Attach the front grid
4. (Optional) insert a rear support rod
5. (Optional) add the watering funnel

Recommended print settings:

• Material: PET-G (recommended) – better resistance to moisture and outdoor conditions
• Layer height: 0.2 mm
• Infill: 10–20%
• Walls: 2–3 perimeters
• Supports: not required (only for the funnel)

⚠️ Note:

This is the first version (v1) of the model. I’m currently working on an improved version that will be:

• easier to print
• simpler in design

Any feedback or suggestions are welcome