Megaman and Zero! 🔥

I am STOKED to take a brief break from my series to drop some more nostalgia to my collection. I told you 90's kids I'd take care of you! 😜

This is a 6 color print. It's got some fun stuff. I made White the second stage, so by the end of layer 12, it's as if your printer just provided itself with a page from a coloring book! Super cool if you're into watching these things print. I also managed to layer it so Zero has the least height, his hair is in the middle, and Megaman is popping right out front. Finally, because Megaman is way out front, you will get to see some fun color variants for him along the way. 😁

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 3.04mm and the Actual Thickness is 3.04mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
 

This print uses 6 unique filaments

There are currently 2 programmed pauses for Single AMS users. If you have more than one AMS unit, or you are doing manual swaps at each color change, they you can delete these pauses on the slice preview screen. 👌

(Single AMS Users. Begin with Black, White, Red, and Yellow loaded into your AMS. When you send your print, you must assign both Red and Cyan to  AMS slot 3. You must also assign both Yellow and Blue to AMS slot 4.)

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Jade White
    At layer #13 (1.12mm) swap to Black
    At layer #14 (1.2mm) swap to Red
    At layer #19 (1.6mm) swap to Yellow
- There is a pause here for single AMS users to gently remove their Red, and replace it with Cyan. Hit resume after.

    At layer #21 (1.76mm) swap to Jade White
    At layer #23 (1.92mm) swap to Yellow
    At layer #27 (2.24mm) swap to Black
    At layer #28 (2.32mm) swap to Cyan
  - There is a pause here for single AMS users to gently remove their Yellow, and replace it with Blue. Hit resume after.  

    At layer #33 (2.72mm) swap to Jade White
    At layer #35 (2.88mm) swap to Blue for the rest.