Parametric Gridfinity Notebook Stand with Honeycomb Panels & Magnet Support

A fully customizable Gridfinity-compatible stand designed to hold notebooks, tablets, e-readers, and books. Configure grid dimensions, slot count, panel height, taper angle, and honeycomb patterns directly on MakerWorld – no code editing required.

Features:

• 🧩 Gridfinity Standard - Snaps securely into any Gridfinity baseplate with precision-fit feet.
• 📖 Adjustable Slots - Define exactly how many divider panels and slots you need to organize your devices and books.
• ⬡ Honeycomb Panels - Divider panels feature customizable hex cutouts for a modern aesthetic, reduced filament usage, and a striking look.
• 📐 Tapered Design - Panels taper inward toward the top with smooth, rounded corners, making it easy to slide items in and out.
• ✂️ Clip or Skip - Choose whether edge hexes are cleanly clipped along the tapered panel boundary or if partial hexes are omitted entirely.
• 🔍 Sliver Filter - Set a minimum visible hex size so tiny, unprintable partial cutouts are automatically filled in.
• 🧲 Magnet Ready - Optional magnet holes (6.5mm) in the feet for a secure hold on magnetic baseplates.
• 🛑 Front Stop Lip - Add an optional raised retaining lip at the front edge to prevent items from sliding forward.
• ⚙️ Customizable Online - Adjust grid size, slot count, panel height, tilt angle, wall thickness, and hex dimensions on MakerWorld.

Default Setup:

• 3×1 grid (fits 3 Gridfinity units wide)
• 2 notebook slots (creates 3 vertical divider panels)
• 85 mm tall panels with a 21.7° taper angle and 5 mm rounded top corners
• 10 mm hex holes with 3 mm wire thickness between them
• Magnet holes enabled
• Hex side clipping enabled

Printing Guidelines:

• Material: PLA, PETG, or PC recommended (stiffer materials work best for the divider panels)
• Layer Height: 0.2 mm or finer for clean hex edges and smooth rounded borders
• Infill: 15–20% is usually enough
• Supports: Not needed