Eclipson Model A 3D Printed RC Aircraft (FREE)!

Eclipson model A is just a functional 3D printed RC plane extremely easy to print, assemble and fly. So if you are a beginner with 3D printed planes this is your model!. The plane has been designed from scratch to be 3D printed and to be an RC plane, meaning that his outer shape has been optimised for those purposes and that is the key factor that explains why this model flies  incredibly  well without any extra drag or extra weight typical from scale models, but also explains why it is so easy to assemble since it uses very little parts allowing you to rebuild the plane quite fast and for a really low price: Just 12€ if printed with LW-PLA or 6€ if printed with cheap PLA. So do not be afraid of crashing this model, the electronics will survive and can be reused not only in the next model A that you print but also in any of our designs since we have standardized all the electronic components to reduce even more the price of your RC plane.

Build Video Link: 

Specifications

LW-PLA:

Printed Weight: 220g

Take Off Weight: 490g

Stall Speed: 24km/h

Wing Loading: 30g/dm^2

PLA:

Printed Weight: 390g

Take Off Weight: 730g

Stall Speed: 29km/h

Wing Loading: 45g/dm^2

Wing Span: 1000mm (39")

Wing Surface: 16dm^2

Aspect Ratio: 6.6
Length: 760mm

Electronics: 

Battery: 
VOLTAGE - 7,4V (2S) or 11,1V (3S)
CAPACITY - 500 mAh to 1500 mAh
DISCHARGE - >20C 

Radio Control System:

Recommended is FlySky FS-i6X with FS-iA6B

Servos:

4 9gram hobby servos

Motor:

Recommended is 2212 2200kv brushless motor

propeller:

recommended is 7x4 (or whichever one fits your ESC and motor)

ESC:

recommended is 40A Brushless ESC (or whichever one fits your electronics)

Other Parts (REQUIRED FOR BUILD):

-PUSH RODS - D1,2mm (min length 450mm)  4units
-STEEL ROD - D2mm (Length 180mm) 4units
-STOP COLLARS D2,1mm  2units
-BOLT - M3X15mm (with nuts and washers)  4units
-SCREW - M2X8mm (aprox) 26units
-RUBBER BAND  units
-VELCRO
-WIRE - 0,5 mm
-GLUE - cyanoacrylate + accelerator
-PUSH RODS CONNECTORS  4units

Any questions, drop a comment and I'll get back to you or visit the website: [https://www.eclipson-airplanes.com/modela](https://www.eclipson-airplanes.com/modela)